Shoei Glamster Visor Compatibility: The CPB-1V Explained

Shoei Glamster visor compatibility comes down to one short code. Shoei pairs the Glamster 06 with its own shield, the CPB-1V, and that code is the reference point for every replacement visor, tint and anti-fog insert you buy for the helmet. This guide explains what Shoei itself says, why the Glamster is easy to get wrong, and how to check a listing before you order.

The short answer: on Shoei’s own Glamster 06 page, every visor is listed as a CPB-1V, in clear, light smoke and dark smoke. We have found no Shoei source that puts another helmet on the CPB-1V, so treat the Glamster as a helmet with its own visor and buy parts listed for the Glamster by name.

  • Shoei lists the CPB-1V shield for the Glamster 06.
  • Shoei’s GT-Air family uses different shields (the CNS-1 range), so a “Glamster and GT-Air” visor cannot be the same factory shield for both.
  • Fitment and legality are separate questions: in Great Britain the legal test is the marking on the individual visor.
Shoei Glamster visor compatibility: Shoei Glamster Replacement Visor in clear and tinted options
A replacement visor listed for the Shoei Glamster only.

What Shoei says about the Glamster visor

The most reliable fitment source for any helmet is the maker’s own parts list. On the Shoei Europe Glamster 06 page, the visor section shows three shields: “Glamster 06 CPB-1V Clear”, “Glamster 06 CPB-1V Light Smoke” and “Glamster 06 CPB-1V Dark Smoke”. Every visor on the page carries the same code.

Shoei describes the Glamster 06 as part of its Neo-Classic line. That matters for visors, because the Glamster’s shell, eye port and hinge are its own design rather than a restyled touring helmet. The shield is cut for that shape and that hinge, which is why you should not expect a visor from a different Shoei family to clip on.

We read the code as the shield’s identity. If a listing quotes CPB-1V and names the Glamster, it is describing the right part. If it quotes a different code, or no code at all, check further before you buy.

Shoei Glamster visor compatibility with other Shoei helmets

The question riders ask most about Shoei Glamster CPB-1V visor compatibility is which other Shoei models share the Glamster’s visor. On the evidence we can verify, the honest answer is none that Shoei confirms. Shoei’s Glamster page lists only Glamster 06 shields, and we have not found a Shoei chart that puts a second model on the CPB-1V.

Compare that with the GT-Air family. Shoei’s CNS-1 face shield page covers the GT-Air, GT-Air II and Neotec, and Shoei uses a separate CNS-1C for the GT-Air 3. Those helmets are covered in our guide to Shoei GT-Air visor compatibility, and the CNS codes are explained in Shoei CNS-1 vs CNS-3.

Because Shoei puts the Glamster 06 on the CPB-1V and the GT-Air on the CNS-1, one shield from Shoei’s range cannot be the factory part for both. Keep that in mind when you see a listing that names the Glamster next to touring or modular helmets.

Why multi-model listings are not proof of fit

Many aftermarket listings name several helmets in one title, such as “fits Glamster, GT-Air, J-Cruise and more”. Those names come from supplier data. They are not a fitment chart, and they are not the maker’s word.

A long “fits” list can be right for one model and wrong for the rest. It can also mix helmets that the maker puts on different shields, which is exactly the case for the Glamster and the GT-Air. The safest rule is simple: look for a listing made for the Glamster alone.

In our own catalogue, the visors listed for the Shoei Glamster include parts matched to this model only. Those are the ones we point Glamster owners to, and they are the only ones linked from this guide.

How to confirm your helmet is a Glamster 06

Before you match a visor, confirm the helmet. Shoei’s current page calls it the Glamster 06, so look for that name on the box, the manual, the swing tag or your receipt. Those are printed to identify the helmet and are easier to read than anything inside it.

If you bought the helmet second-hand, check the seller’s original listing and the labels under the comfort liner. Write down every word and number exactly as printed. If nothing says Glamster 06, contact a Shoei dealer with a photo of the helmet before you order a shield.

Not sure which Shoei you own at all? Our guide to what visor fits a Shoei helmet walks through the main families, and what visor fits my helmet covers every brand we stock.

Matching a replacement visor to the Glamster

Once you know the helmet, a short checklist removes most of the risk of a wrong fit. Work through it in order.

  1. Confirm the model. Glamster 06, written exactly as the paperwork shows it.
  2. Look for the Glamster by name. The product title and its categories should name the Glamster, not only a long “also fits” list.
  3. Check the shield code where it is given. CPB-1V is the code Shoei uses for the Glamster 06.
  4. Pick the tint for how you ride. A clear replacement visor is the everyday choice for road riding.
  5. Decide on anti-fog. If you plan to fit an insert, check the visor has the two small pins it needs.

For part numbers across other brands, our guide to motorcycle visor part numbers explains how to read them. The same principle applies everywhere: the maker’s code beats a marketing name.

Tints, photochromic visors and the Glamster

Shoei’s own Glamster 06 page shows the CPB-1V in clear, light smoke and dark smoke. Aftermarket ranges usually add more options, including mirrored and photochromic finishes. The fit is the same across the range when the visor is made for the Glamster, so the choice is about light, not about the hinge.

On a retro helmet such as this one, a photochromic visor for the Shoei Glamster darkens in bright sun and turns near-clear again as the light drops. Our photochromic visor range explains the options, and how photochromic visors work covers the chemistry. For the Glamster, there is a photochromic visor listed for the Shoei Glamster.

If you are weighing a photochromic visor against a fixed tint, photochromic vs tinted visors sets out the trade-offs. Mirrored finishes are covered in the iridium visor collection, with the legal limits below.

The marking, not the tint, decides road use

Fitment tells you whether a visor clips on. It tells you nothing about whether you can ride on the road with it in Great Britain. Under the Motor Cycles (Eye Protectors) Regulations 1999, eye protection must meet a prescribed standard, such as BS 4110, and be “marked with an approved certification mark of an approved body”.

So the legal test is the marking on the individual visor, not its colour, its tint name or the helmet it fits. Iridium, mirrored and dark smoke visors transmit too little light to be legal for road use in Great Britain, day or night. We do not verify markings on individual items, so check the marking on the visor you receive before riding on the road.

The Highway Code adds a practical point. Rule 83 of the Highway Code says: “Before each journey check that your helmet visor is clean and in good condition.” Our guides to tinted visor law in Great Britain and iridium and mirrored visors go into more detail.

Anti-fog inserts for the Glamster visor

An anti-fog insert is sized to the visor, and the visor is sized to the helmet. That means the Glamster’s own visor shape carries through to the insert, and an insert cut for a GT-Air or Neotec visor will not suit it.

Before you buy, check the inside edge of your visor for two small pins. If they are there, the visor is built to hold an insert; if they are not, an insert will not fit it. The anti-fog insert hub explains how inserts for Pinlock-ready visors are sized, and our guide to fitting an anti-fog insert shows the steps.

For this helmet, the anti-fog insert listed for the Shoei Glamster is matched to the Glamster only. It is worth considering if you ride with the visor shut in cold or wet weather, when a bare visor is most likely to mist up.

Common Glamster visor mistakes to avoid

  • Buying from a multi-model list. A title that names the Glamster beside the GT-Air or Neotec is supplier data, and Shoei puts those helmets on different shields.
  • Assuming every Neo-Classic Shoei shares a visor. Shoei lists shields per model, so check each helmet by name.
  • Choosing a tint for the look alone. A dark or mirrored visor may fit perfectly and still be unusable on the road.
  • Skipping the pins check. No pins means no insert, whatever the listing says.

This guide was written by the ClearLineMoto team. For every Shoei model we cover, start with the visors listed by Shoei model, or use the visor finder to search by helmet.

Visors and inserts mentioned in this guide

Shoei Glamster visor FAQ

Which visor fits the Shoei Glamster?

Shoei lists the CPB-1V shield for the Glamster 06, in clear, light smoke and dark smoke. Buy a visor listed for the Glamster by name, and check the shield code where the listing gives one.

Does the Shoei Glamster share a visor with the GT-Air?

Not according to Shoei. Shoei puts the Glamster 06 on the CPB-1V and the GT-Air on the CNS-1, so a single factory shield is not the original part for both helmets.

Can I fit an anti-fog insert to a Glamster visor?

Only if the visor has the two small pins that hold an insert. Check the inside edge of the visor, then choose an insert made for the Glamster rather than one cut for another Shoei helmet.

What are the Shoei Glamster visor Pinlock 70 options?

Shoei’s Glamster page names one Pinlock lens, the CPB-1V Pinlock EVO lens, which it says comes as standard equipment, and it names no Pinlock 70 lens (checked on 11 November 2026). Our anti-fog insert listed for the Shoei Glamster is our own part and not a Pinlock product. Its product page says most of our inserts fit between two small pins on the inside of the visor, so check that yours has them.

Is a tinted Glamster visor legal on the road?

Fitment does not decide that. In Great Britain the legal test is the approved marking on the individual visor, and iridium, mirrored and dark smoke visors transmit too little light to be legal for road use.

Where can I buy a Shoei Glamster tinted visor?

We sell one, our replacement visor listed for the Shoei Glamster, in mirrored finishes and black. Iridium, mirrored and dark-smoke visors are not road legal in Great Britain, day or night, and the product page says the same of the black. Shoei’s own CPB-1V also comes in light smoke and dark smoke, sold by Shoei and its dealers. Check the marking on the visor you receive before you ride on the road.

Is there a Shoei Glamster dark smoke shield replacement?

Yes, from Shoei: its European shop lists a Visor (CPB-1V) Dark Smoke at 79.95 euros, checked on 11 November 2026. Iridium, mirrored and dark-smoke visors are not road legal in Great Britain, day or night. Check the marking on the visor and the law where you ride.

Is there a Shoei Glamster visor seal water leak fix?

Shoei’s Glamster page gives no repair steps for a leak. It says the rim shape of the window beading, the seal around the eye port, enhances airtightness, and that the visor is held by screws and can be adjusted while fitted (checked on 11 November 2026). So check that the visor is a CPB-1V made for the Glamster and closes evenly onto the beading. If water still gets in, ask a Shoei dealer to check the adjustment and the beading.