Description
A scratched or hazed visor scatters light, and you notice it most riding into low sun. This is a fresh aftermarket replacement visor cut for your LS2, so you get a clean, undistorted view of the road back.
Which helmets does this fit?
This replacement visor is matched to this model:
The helmet model name is printed inside the chin bar, under the lining or on the strap label. If yours isn’t listed, check the visor finder — visors are model-specific and a part from a neighbouring model usually won’t clip in.
Which tint should I choose?
- Blue, Silver, Revo Blue, Red Gold, Revo Silver, Revo Red — A mirrored finish. Cuts glare hard and hides your eyes. Mirrored and iridium finishes transmit too little light to be legal for road use in the UK, day or night — treat them as off-road, track and closed-course choices.
- Black — Sunglasses-level tint. It transmits too little light to be legal for road use in the UK — track and off-road only. Not for night use.
- Clear — The everyday choice. Full visibility day or night, and the safe default if you only buy one.
Every tint listed here is made for this exact visor aperture, so whichever you pick it clips into the same fitting.
How do I fit it?
Open the visor fully, release the side mechanism on each side, lift the old visor away and clip the new one in until it clicks. It takes a couple of minutes and needs no tools. Peel the protective film off both sides before your first ride.
Is this legal on the road?
What decides it is the approval marking on the individual visor — a BS 4110 grade with an approved certification mark, or an ECE 22.05 approval — not the tint name. These are unbranded aftermarket visors and we cannot confirm the marking on any individual item, so we do not offer them as authorised for road use. Check the marking on the visor you receive. Dark smoke, mirrored and iridium finishes transmit too little light to be legal for road use in the UK, and are a bad idea at night whatever the local rule says — treat them as off-road, track and closed-course daytime choices. This is general guidance, not legal advice — check what applies where you ride.
Shipping and returns
Free tracked shipping to the UK, USA and Europe. Delivery estimates are shown at checkout. If it’s not right, you have 30 days to send it back — see our returns policy.
Aftermarket part, not OEM. LS2 model names indicate fitment compatibility only — we are not affiliated with or endorsed by LS2. Confirm your exact model before ordering.
Great for the helmet, it is black but you can still see at night in the city
The item matches the posted listing, very nice and of great quality. I recommend it without a doubt
RED GOLD Perfect!!!! It even closes better than the original clear one, and combined with the internal sun visor it dims the light very well; on its own it protects fairly well from the sun but still leaves excellent visibility in tunnels. Shame the BLU cannot be bought in Italy. I have not tried it with pinlock
Fits exactly on an LS2 Adventure helmet. 👍
Item 100 percent compatible with the LS2 Explorer helmet. Fast shipping.
This LS2 MX701 Explorer face shield is better than I even imagined. I highly recommend this helmet visor. I will definitely be ordering another for a spare. The tent is dark enough to take the edge off during the day but not so dark to make it hard to see at night. With this visor it’s actually seems to make everything clearer. Once again, I highly recommend buying this visor. I will now buy others in this range.
Excellent material, and it goes excellently on the helmet, makes the helmet look top... I recommend it.
Very good for the cost; it's a bit of a struggle to click the lock in when closing the visor but nothing serious. I'll buy the other colours.